Motorized FlexShades The ultimate in high tech convenience and functional reliability

Draper Flex Shades

Motorized FlexShades
The ultimate in high tech convenience and functional reliability.

Motorized FlexShades by Draper offer the ultimate in high tech convenience and functional reliability. Compact European motors are located within the roller for smooth, reliable operation.

Installed in Draper extruded pocket at the head, shades disappear when not in use. Eliminates sloppy stacking at jambs common with draperies and vertical blinds.

A simple wall switch is standardly included with each motorized unit. Optional switching systems are available for total flexibility, including sun sensors, programmable timers, and combinations of group and individual control.

In addition to standard motorized roller dimensions and voltages, low voltage motors and smart motor technology are available on request.

For efficient energy management and sheer convenience, Draper Motorized FlexShades are the most intelligent sun control solutions.

Hardware

Mounting Brackets—Standard with all FlexShades, unless optional fascia, headbox, or LightBloc System hardware required. For wall, ceiling, or jamb installation.
Fascia—Extruded fascia conveniently hides hardware. May be mounted inside or outside with necessary endcaps. Available in 16' continuous sections; in black, white, ivory, charcoal bronze, and clear anodized finishes. 3 7/8" or 4 5/8" high as required.
Pocket—For clean, flush installation, use extruded pocket. With bottom closure panel in place, only a narrow slot is visible. Refer to FlexShade Pocket Section for complete pocket details.
Headbox—Complete extruded headbox is suitable for surface installation to head, jamb, or wall. Sizes 3 7/8" or 4 5/8" high as required.

Fabrics

SheerWeave ® Series SW3000—Fiberglass and polyester/vinyl vertical weave, approximately 14% open (previously Draper’s SW2400).
SheerWeave ® Series SW2000/SW2100—Fiberglass/PVC basketweave, averaging 5% open and 10% open respectively.
“E” Screen—Fiberglass/PVC basketweave, approximately 6% open.
SheerWeave ® Series PW3500/4100/4400—Polyester/vinyl, averaging 5%, 10% and 3% open respectively.
SheerWeave ® Series PW4800—Fiberglass and polyester/vinyl, approximately 1% open.
Auris—Translucent PVC coated fiberglass textile. Openness 1-2%.
Flocké—Opaque Fiberglass textile, with white exterior and soft woven interior.
SunBloc Series SB9000—Opaque vinyl-coated fiberglass.
SunScreen ® Series SW1000—Vinyl-coated fiberglass weave, approximately 23% open. Available on fixed FlexShade Panels.

Controls
Motorized FlexShades utilize advanced motor-in-roller design for maximum sound isolation and ease of installation. Draper offers a wide variety of control options.

Crank Override Option
Crank override provides for manual operation of the shades in the event of a power outage or motor failure. The detachable crank may be stored out of the way until needed. This option is particularly attractive with blackout shades in audio visual areas.

Multiple-Panel Shades
Exclusive Draper carrier bearing allows for two shade panels on one 2" roller with a single motor. A no-sag installation is possible up to a width of sixteen feet. Continuous fascia neatly conceals hardware. (Not suitable for use with side channels.)

Manual FlexShades
Flexible Shading (back to top)
Simplicity, reliability, and the broadest selection of fabrics in the industry make Draper manually operated FlexShades the wise choice for building standard window treatment.

Choose from the following operator styles:

Bead Chain/Clutch
Unlike competitive systems, Draper clutch never needs adjustment and can be mounted either on the right or left, as preferred. Shades stop when operating chain is released and cannot mistrack. Standard metal bead chain hangs at the side, leaving the view unobstructed. Preset up and down limit stops prevent shades from being raised or lowered too far.
Crank Operator
Crank operated FlexShades offer complete reliability and precise light control, with minimal effort. Even the largest shades operate smoothly and effortlessly. With crank control you can easily operate tall shades, wide shades or even groups of shades from a single controller. All shades can be raised or lowered to exactly the same height. Compact bidirectional gear assembly can be mounted for either right-or left-hand operation. Attractive crank handle hinges to form a thin, straight rod at edge of window when not in use. Nothing obstructs your view. Crank operator can be permanently mounted or detachable, and up to 6' in length. Optional heavy-duty crank is available in lengths to 10'. In public areas a detachable operator prevents unauthorized persons from operating the shades. All crank operated shades are furnished with endcaps.
Spring Roller Operation
Traditional window shade operation. Galvanized, or enamelled steel rollers and heavy-duty springs sized to operate any shade easily through 12' wide x 12' high.

Dimensions—Crank-Operated

Dimensions—Clutch-Operated

Hardware
Mounting Brackets—Standard with all FlexShades, unless optional fascia, headbox, or LightBloc System hardware required. For wall, ceiling, or jamb installation.

Fascia—Extruded fascia conveniently hides hardware. May be mounted inside or outside with necessary endcaps. Available in 16' continuous sections; in black, white, ivory, charcoal bronze, or clear anodized finish. 3 7/8" or 4 5/8" high as required.

Pocket—For clean, flush installation, use extruded pocket. With bottom closure panel in place, only a narrow slot is visible. Refer to FlexShade Pocket Section for pocket details.

Headbox—Complete extruded headbox is suitable for surface installation to head, jamb, or wall. Sizes 3 7/8" or 4 5/8" high as required.

Multiple-Panel Shades—Exclusive Draper carrier bearing allows for two shade panels on one 2" roller with a single crank operator. A no-sag installation is possible up to a width of sixteen feet. (Not available with Type C pocket).

Fabrics

SheerWeave ® Series SW3000—Fiberglass and polyester/vinyl vertical weave, approximately 14% open (previously Draper's SW2400).
SheerWeave ® Series SW2000/SW2100—Fiberglass/PVC basketweave, averaging 5% open and 10% open respectively.
"E" Screen—Fiberglass/PVC basketweave, approximately 6% open.
SheerWeave ® Series PW3500/4100/4400 Polyester/vinyl basketweaves, averaging 5%, 10% and 3% open respectively.
SheerWeave ® Series PW4800—Fiberglass and polyester/vinyl, approximately 1% open.
Auris—Translucent PVC coated fiberglass textile. Openness 1-2%.
Flocké—Opaque fiberglass textile, with white exterior and soft woven interior.
SunBloc Series SB9000—Opaque vinyl-coated fiberglass.
SunScreen ® Series SW1000—Vinyl-coated fiberglass weave, approximately 23% open. Available on fixed FlexShade Panels.

Skylight FlexShades

(back to top)

Add a shading system to your skylight to protect people and furnishings.

An unprotected skylight can generate intense heat and glare. FlexShade Systems are the ideal remedy. Inconspicuously recessed into the skylight opening, a Skylight FlexShade provides sunlight and UV control to protect people and furnishings. Available with motorized or manual operating systems. Select a mesh or translucent fabric for light filtration, or use SunBloc or Flocké for complete opacity. Standard hardware finish is clear anodized; black, white, ivory or bronze enamel finish is available.

Operating Systems
Motorized Operation—Motorized Skylight FlexShades are a convenient, unobtrusive covering for inaccessible skylights. Roller boxes and side channels can be recessed into the skylight opening; shade operates smoothly and quietly on command. Perimeter support angles simplify installation. Spring roller opposite electric motor maintains constant tension, and exclusive, patented Fabric Retention System prevents disengagement of fabric from channels.

A variety of control systems are available for motorized Skylight FlexShades.

Crank Operator—Skylight FlexShades can also be manually operated by detachable crank and gearbox. Specify length of crank required (6' maximum in standard configuration; heavy-duty crank available to 10' long).

Detachable crank is the most convenient way to operate a Skylight FlexShade manually. Also available as an emergency override system with motorized units. Bell-shaped connector makes the crank easy to attach, even from the ground. Note: To facilitate proper operation, Skylight units must be installed square and with rollers level. Installers must be qualified craftsmen.

Dimensions
Due to the force of gravity, Skylight FlexShades are available to a maximum unsupported width of 42". Larger units require one or more support cables, up to a maximum of 6' wide x 10' long. Cables are 3/16" diameter vinyl clad aircraft cable.

Flex Shade Panels (back to top)

Install a fixed frame panel to the interior or exterior of a window, skylight, sloped glazing, or odd-shaped opening.

FlexShade fixed frame panels provide sunlight filtration at lower cost than operable solutions. They are particularly well suited for skylights and sloped glazing in solariums or odd-shaped openings. (Not suitable for curved framing).

Use FlexShade Panels to help prevent ultraviolet damage to expensive textiles and furniture located in direct sunlight. Relieve the discomfort from solar heat and glare often associated with unprotected glazing.

Although SunScreen® is the standard fabric offered, FlexShade Panels can utilize any of Draper's mesh fabrics, permanently attached to lightweight aluminum frames. A wide range of openness factors are available, ranging from 3% to 32%.

Standard fixed panels utilize a roll formed aluminum frame. Heavy Duty fixed panels utilize an extruded aluminum frame. Frames are available in dark bronze, white, or mill finish aluminum.

Panels mount easily on surface or within framing of windows with clips. Clips allow removal of FlexShade Panels for routine maintenance and cleaning. For exterior usage, specify heavy duty extruded track.

Available in sizes up to 5' x 10'. Panels exceeding 40" in length require a center support member.

Frame cross-section Typical FlexShade Panel Dimensions and details may vary. frame components at manufacturer's discretion.
Installation of Interior FlexShade Panels

Installation of Exterior FlexShade Panels
FlexShade Panels for exterior usage are easy to install. Install mounting channels first. Then slide Fixed Panel in from lower end. Install keeper track to secure panel in frame. At maintenance time, simply remove the bottom keeper, and slide out the fixed panel.

LightBloc Shading System (back to top)

Precision engineered and custom built for each opening.

Completely block all light with a 100% opaque fabric.

For total darkness, specify the LightBloc Shading System. The LightBloc may be motorized or manually operated with bead chain/ clutch, crank, or spring roller. Choose from 13 SunBloc fabric colors, or 14 Flocké colors.

Ideal for audiovisual, conference, and training rooms, the LightBloc is also a popular choice for home theatre installations. Durable anodized and painted finishes insure an aesthetically pleasing installation.

The system includes aluminum headbox, side and sill channels. Headboxes are available in styles to recess or surface mount (standard). Exclusive, patented Fabric Retention System prevents disengagement of fabric from channels. Units made with Flocké fabric are available in sizes up to 80" wide and do not have the Fabric Retention System.

All hardware is available with black, white, ivory, clear anodized, or charcoal bronze finish. Internal light seals and opacity plates eliminate all light leaks. Note: To ensure total blackout, caulking around perimeter is recommended.

Operating Systems
Motorized Operation—Motorized LightBloc shades: for maximum reliability and convenience. Motor is located within the roller for smooth, reliable operation. Right hand motor location is standard.

Crank Operator—Crank operated LightBloc FlexShades offer complete reliability and precise light control, with virtually no effort. Even the largest shades operate smoothly and effortlessly. Compact bidirectional gear assembly can be mounted either right (standard) or left, as preferred. Crank hinges to form a thin, straight rod at edge of window when not in use. Crank operator can be permanently mounted or detachable.

Bead Chain/Clutch—Unlike competitive systems, the Draper bidirectional clutch never needs adjustment and can be mounted either right (standard) or left, as preferred. Shades stop when operating chain is released and cannot mistrack. Standard metal bead chain hangs at the side, leaving the view unobstructed. Preset up and down stops prevent shades from being raised or lowered too far.

Spring Roller—Galvanized steel rollers and heavy-duty springs sized to operate safely and reliably. Roller is under constant tension, with a latching chain at sill.